LSI 25083 Manuale Utente
1-10
Overview
Copyright © 2009 by LSI Corporation. All rights reserved.
•
Two internal connectors for the SAS 9240-8i, SAS 9260-8i, SAS
9261-8i, and SAS 9260DE-8i RAID controllers
9261-8i, and SAS 9260DE-8i RAID controllers
•
One external connector for the SAS 9280-4i/4e RAID controller
•
Two external connectors for the SAS 9280-8e RAID controller and
the SAS 9280DE-8e RAID controller
the SAS 9280DE-8e RAID controller
•
Support for RAID levels 0, 1, 5, 6, 00, 10, 50, and 60
•
Advanced array configuration and management utilities
•
Support for global hot spares and dedicated hot spares
•
Support for user-defined stripe sizes: 8, 16, 32, 64, 128, 256, 512,
or 1024 KB
or 1024 KB
•
Advanced array configuration and management utilities offer:
–
Online capacity expansion to add space to an existing drive or
new drive
new drive
–
Online RAID level migration
–
Drive migration
–
Drive roaming
–
No reboot necessary after expansion
–
Load balancing
–
Media scan
•
User-specified rebuild rate (specifying the percentage of system
resources to use from 0%-100%)
resources to use from 0%-100%)
•
32-Kbyte nonvolatile random access memory (NVRAM) for storing
RAID system configuration information; the MegaRAID SAS firmware
is stored in flash ROM for easy upgrade.
RAID system configuration information; the MegaRAID SAS firmware
is stored in flash ROM for easy upgrade.
1.6.1
SAS Features
The following list describes the SAS features of the RAID controllers:
•
Provides four fully independent PHYs or eight fully independent
PHYs, depending on the controller
PHYs, depending on the controller
•
Supports 6Gb/s and 3Gb/s SAS data transfers per PHY
•
Supports SMP to communicate topology management information
•
Supports SSP to enable communication with other SAS devices