DFI 40800950 Manuale Utente

Hardware Installation

2.7.18 RIMM/PCI Standby Power LED

RIMM Standby Power LED

This LED will turn red when the systems

power is on or when it is in the

Suspend state (Power On Suspend or

Suspend to RAM). It will turn green

when the system is in the Soft-Off state.

PCI Standby Power LED

This LED will turn red when the system

is in the power-on, Soft-Off or Suspend

(Power On Suspend or Suspend to

RAM) state.

3.3VSB Standby for PCI (jumper JP7)

The default setting of jumper JP7 is On. It provides 3.3VSB

Standby power to the PCI slots. If you are using a PCI modem

card that does not comply to the PCI 2.2 specification, please

set this jumper to Off. The

PCI Standby Power LEDs light will

subsequently turn off.

Important:

Lighted LEDs (red) serve as a reminder that you must power-

off the system then turn off the power supplys switch or

unplug the power cord prior to installing any RIMM or add-on

cards.

(default)

Off