Fujitsu FR81S Manuale Utente
CHAPTER 30: POWER CONSUMPTION CONTROL
5. Operation
FUJITSU SEMICONDUCTOR LIMITED
CHAPTER : POWER CONSUMPTION CONTROL
FUJITSU SEMICONDUCTOR CONFIDENTIAL
42
5.6.3. Wake Up from the Stop Mode
Wake up from the stop mode is described below.
The stop mode is terminated under the following conditions:
⋅
Reset
⋅
Generation of interrupt request in which the value of corresponding ICR register is other than "0x1F"
(see "CHAPTER: INTERRUPT CONTROL (INTERRUPT CONTROLLER)")
⋅
Generation of NMI request
⋅
Generation of tool break while being connected to ICE
For the wake up caused by an interrupt request, the CPU does not necessarily have to be set so as to accept
this interrupt request. When an interrupt request is not accepted, the program continues to run from the
instruction next to the instruction which activated the stop mode.
MB91520 Series
MN705-00010-1v0-E
1129