Omron C200HE Manuale Utente
307
It cannot be used for other I/O words, such as I/O Units on Slave Racks or
Group-2 High-density I/O Units.
Group-2 High-density I/O Units.
St must be less than or equal to E.
Description
To refresh I/O words allocated to CPU or Expansion I/O Racks (IR 000 to IR 029
or IR 300 to IR 309), simply specify the first (St) and last (E) I/O words to be re-
freshed. When the execution condition for IORF(97) is ON, all words between St
and E will be refreshed. This will be in addition to the normal I/O refresh per-
formed during the CPU Unit’s cycle.
or IR 300 to IR 309), simply specify the first (St) and last (E) I/O words to be re-
freshed. When the execution condition for IORF(97) is ON, all words between St
and E will be refreshed. This will be in addition to the normal I/O refresh per-
formed during the CPU Unit’s cycle.
To refresh I/O words allocated to Special I/O Units 0 through 9 (IR 100 to IR 199),
designate IR 040 to IR 049. These IR words are just used to identify the corre-
sponding Special I/O Unit; execution of IORF(97) will have no effect on the con-
tent of IR 040 to IR 049.
designate IR 040 to IR 049. These IR words are just used to identify the corre-
sponding Special I/O Unit; execution of IORF(97) will have no effect on the con-
tent of IR 040 to IR 049.
For example, set St to IR 043 and E to IR 045 to refresh the I/O words allocated to
Special I/O Units 3, 4, and 5. The I/O words allocated to those Units (IR 130 to
IR 159) will be refreshed when IORF(97) is executed. This will be in addition to
the normal I/O refresh performed during the CPU Unit’s cycle.
Special I/O Units 3, 4, and 5. The I/O words allocated to those Units (IR 130 to
IR 159) will be refreshed when IORF(97) is executed. This will be in addition to
the normal I/O refresh performed during the CPU Unit’s cycle.
To specify a particular 10-word Special I/O Unit Area (IR 100 to IR 190 or IR 400
to IR 450), input the first word of the 10-word area. (The last digit of the IR word
must be 0.)
to IR 450), input the first word of the 10-word area. (The last digit of the IR word
must be 0.)
Refer to 5-25-9 GROUP-2 HIGH-DENSITY I/O REFRESH – MPRF(61) for de-
tails on refreshing words allocated to Group-2 High-density I/O Units.
tails on refreshing words allocated to Group-2 High-density I/O Units.
Flags
ER:
St and/or E aren’t within the proper setting ranges.
(000 to 029, 040 to 040, 100 to 190, 300 to 309, or 400 to 450).
(000 to 029, 040 to 040, 100 to 190, 300 to 309, or 400 to 450).
St and E aren’t within the same setting range.
St is greater than E.
5-25-9
GROUP-2 HIGH-DENSITY I/O REFRESH – MPRF(61)
St: Starting unit number
#0000 to #000F
E: End unit number
#0000 to #000F
Ladder Symbols
Operand Data Areas
000: Set to 000.
---
MPRF(61)
St
E
000
@MPRF(61)
St
E
000
Limitations
MPRF(61) can be used to refresh I/O words allocated to Group-2 High-density
I/O Units only. It cannot be used for other I/O words.
I/O Units only. It cannot be used for other I/O words.
St and E must be between #0000 and #000F. St must be less than or equal to E.
Description
When the execution condition is OFF, MPRF(61) is not executed. When the
execution condition is ON, the I/O words allocated to Group-2 High-density I/O
Units with unit numbers St through E will be refreshed. This will be in addition to
the normal I/O refresh performed during the CPU Unit’s cycle.
execution condition is ON, the I/O words allocated to Group-2 High-density I/O
Units with unit numbers St through E will be refreshed. This will be in addition to
the normal I/O refresh performed during the CPU Unit’s cycle.
It is not possible to specify the I/O words by address, only by the unit number of
the Unit to which they are allocated.
the Unit to which they are allocated.
Execution Time
The execution time for MPRF(61) is computed as follows:
T
MPRF
=
Instruction execution time
+
+
∑
(Group-2 High-density I/O Unit I/O refresh times)
Special Instructions
Section 5-25