Advantech Intel Manuale Utente

Chapter 6  Award BIOS Setup         63

This option controls the ECC capability in the CPU level 2 cache.

This option speeds up the Power-On Self Test (POST) conducted as
soon as the computer is turned on. When enabled, the BIOS shortens
or skips some of the items during the test. When disabled, normal
POST procedures resume.

These options determines the boot up sequence.  The default value for
the first, second, and third devices options are "Floppy, HDD-0, and
LS/ZIP" respectively.  The following options are available:

Floppy:

Computer will boot from the floppy disk drive

LS/ZIP:

Computer will boot from the LS or ZIP drive

HDD-0:

Computer will boot from the primary master hard disc drive

SCSI:

Computer will boot from the SCSI drive

CD-ROM:

Computer will boot from the CD-ROM drive

HDD-1:

Computer will boot from the primary slave hard disk drive

HDD-2:

Computer will boot from the secondary master hard disk drive

HDD-3:

Computer will boot from the secondary slave hard disk drive

Disabled:

Computer will boot from other devices such as DOC 2000 or

CompactFlash

This option allows users to boot from other connected devices such
as DOC 2000 or CompactFlash

®

If the system has two floppy disk drives, choose enable to assign
physical drive B to logical drive A, and vice versa.

The A20 signal is controlled by the keyboard controller
or chipset hardware

Default: Fast. The A20 signal is controlled by Port 92 or
by a specific chipset method.