Toshiba MA-1535-2 Manuale Utente
13. SPECIFICATIONS
EO1-11149
13. SPECIFICATIONS
13- 1
13. SPECIFICATIONS
Item Description
Size
410 mm (width) x 430 mm (depth) x 335 mm (height) (height including
rubber feet)
rubber feet)
Weight
12.5 kg
Power Requirement:
AC 117V
±
10%, 60 Hz
±
10%, 0.46A
Ambient Temperature
0
°
C to 34
°
C
Relative Humidity
10% to 80% (No condensation)
Memory Protection
Long lasting rechargeable lithium battery is provided.
Paper Width
57.5
±
0.5mm
Outer Roll Diameter
Max.
∅
80mm
Thermal paper rolled with the print side facing outside.
Paper Type
Only paper rolled onto a core is acceptable, however, the paper end
should not be pasted to the core.
Recommended paper type:
should not be pasted to the core.
Recommended paper type:
KF50 (KANZAN)
TF50KS-E2C (Nippon Paper Industries)
P-350 (KSP)
CAUTION!
Use only paper which meets specified requirements. Use of non-specified paper may shorten the
head life of the printer, resulting in problems with print quality, cause a paper feed failure or shorten
the cutter life. All paper should be handled with care to avoid any damage to the paper. Read the
following guideline carefully.
head life of the printer, resulting in problems with print quality, cause a paper feed failure or shorten
the cutter life. All paper should be handled with care to avoid any damage to the paper. Read the
following guideline carefully.
•
Do not store the paper for longer than the manufacturer’s recommended shelf life.
•
Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight,
high temperature, high humidity, dust or gas.
high temperature, high humidity, dust or gas.
•
A contact of chemical or oil may discolour or erase the printed record.
•
Rubbing the paper hard with nail or hard object may discolour the paper.
•
The paper end should not be pasted to the core.
For further information please contact your authorised TOSHIBA TEC representative or authorised
paper manufacturer.