Samsung ER-5200M Manuale Utente

•  11 

2.  Complete the Create New Store dialog according to the Store Information table below: 

 

Enter an eight-character store name. 

Enter a four digit number store number. 

Enter the Phone number preceded by the letter T or P if 
you intend to communicate with the register by modem.  
The T is for TONE and the P is for PULSE.  If you 
communicate direct, leave this field blank. 

Choose Direct, Dial Out Modem, or Internet 

Enter the PC serial port (COM1- COM32) that you are 
using for communications. 

Select 9600, 4800, 2400, 1200, or 19,200.  Be sure that the 
rate set on the register (Port Settings) matches the store 
information rate set here.    

Enter Y if you wish to download PLUs in a polling 
session.  When the session is finished polling, the program 
will download the PLU file. 

Select the Deactivate This Store check box if you wish the 
store to be inactive.   

Unless otherwise indicated, the default value of 99 will be 
entered automatically when the store is created 

This field is to allow you to enter any initialization 
required for your modem for polling or communications.  
Do not add the command prefix “AT” in this string.  If you 
are using the U.S. Robotics Sportster modem, it would be 
good to initialize with the string S7=60.  This value makes 
the modem wait for up to 60 seconds to detect a carrier.  If 
no carrier is detected within 60 seconds after you dial, the 
modem will answer back with No Carrier Detect.  Do not 
put into this string any E, Q or V values.  The software 
automatically handles these values. 

If connection is Internet, enter IP address or IP name. 

If connection is Internet, enter the port the router listens 
on.  (Default is 5000) 

3.  Click Exit to save store information.