Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 Manuale Utente
- 40 -
2.7 Installation under Windows 2000 (Parallel interface with Plug
& Play Enabled)
Note: Proper operation is not guaranteed on the PC running Windows 2000.
1.
Connect the printer to the PC with a parallel interface cable.
2.
Turn on the printer.
3.
Set the printer parameters in the system mode.
B-SX4, B-SX4-CN, B-SX5, and B-SX5-CN
CENTRO. MODE → ECP
PLUG & PLAY→ ON
B-SA4G, B-SA4G-CN, B-SA4T, B-SA4T-CN, B-852-R, B-452-R, B-SX6T-R, B-SX8T-R, B-EX4T1-G,
B-EX4T1-T, B-EX4T2-G, B-EX4T2-T, B-EX4T2-H
B-EX4T1-T, B-EX4T2-G, B-EX4T2-T, B-EX4T2-H
Note: For the parameter setting procedure, refer to Section 6.2 Parameter Setting on the Printer.
4.
Turn on the PC.
Note: Log on as the user with
administrative privilege.
5.
After the system started, new hardware is
detected. When the “Welcome to the Found
New Hardware Wizard” is displayed, click the
[Next] button.
detected. When the “Welcome to the Found
New Hardware Wizard” is displayed, click the
[Next] button.
6.
Select “Search for a suitable driver for my device
(recommended)”, then click the [Next] button.
(recommended)”, then click the [Next] button.