Primera Technology 510212 Manuale Utente

11

Control Panel

Notice that Press's Control Panel LCD Display shows information on both cutting

and printing.  The reason for this is that each of these functions works

independently of each other. This means that if the print job is canceled, for

example, the cutter will continue to cut and vice- versa. The following describes

the function of each button as well as the information found on the LCD display:

LCD Display

This display is used to convey useful information to the user. The following table

shows some of the normal messages you will see during normal operation:
Message

Description

POWER UP

This is displayed during “boot up” sequence when

INITIALIZING

power has been applied to the unit. During this 

sequence you will see helpful information on the

firmware version for both the cutter and the printer

displayed.

PRINTER: READY 

The press is ready to receive a job.

CUTTER: READY
#200 ABR (paper type)

This useful message identifies the type of paper

QUANTITY: XXX

installed as well as the number of prints remaining 

(number of prints)

on the roll. Please refer to section 4-H for a 

description of paper types shown in this display

PAGE COUNT: XXXX 

This message displays the number of pages that 

(number of prints)

have been printed since the press has been turned

on. This number can also be reset to "0". This is 

described later in this section.  

More messages can be seen in Section 9: Troubleshooting.

Impressa3.qxd  10/22/01  9:29 PM  Page 11