Primera Technology 510212 Manuale Utente

16 Section 3:  Getting Started

3. Place the Blade Holder into the Cutter Arm and tighten the gold-colored

Securing Knob by turning it toward the front of the printer.  Tighten only until

the Blade Holder fits securely within the Cutter Arm.  To verify proper

tightness, try rotating the Blade Holder clockwise within the Cutter Arm.  If it

rotates, the Securing Knob needs to be further tightened.  Do not over-tighten!

G. INSTALLING THE MEDIA INPUT ASSEMBLY

Press's Media Input Assembly houses the supply roll of print meda and has

sensors that identify the type of material as well as the number of sheets remaining

on the roll. The Media Input Assembly connects to the press as follows:

1. Lock the Media Input Assembly in place on the left-hand side of the press. The

assembly has extensions on either side that engage securing notches on the

press.

Impressa3.qxd  10/22/01  9:29 PM  Page 16