Primera Technology 510212 Manuale Utente

3. When the file is finished importing, it will automatically be selected. Click and

drag on the surrounding nubs to resize the image. Click and drag on the center

nub to move the image. Note that for best print quality, imported bitmap

images should be kept at or close to their original size.

4. While the image is still selected, click on the Cut menu and select Contour Cut

(see Part F of this section for information on PressPrint's Die Cut feature). The

Contour Cut Settings window appears. 

5. Select         to trace a cut line along the exact contour of your image's outside

edge.  Select          to trace a cut line along the contour of both the outside and

inside edges of your image. In this case, the software will essentially attempt to

cut away anything it sees as white space. Then, enter the desired Offset value

colored portion of your image. Entering a value greater than 0 will cause the

cut line to be placed away from the colored portion of your image. Entering a

value less than 0 will cause the cut line to be placed within the colored portion

of your image. Entering an exact value of 0 will cause the cut line to be placed

on the very edge of where the colored portion of your image meets white

space.

49

Impressa3.qxd  10/22/01  9:29 PM  Page 49