Casio KL-G2 Manuale Utente

EN

Specify the length of the block and then press SET.
•  Direct input of values is also supported.

•  The length of each block and the number of input characters affects 

how the label is printed. You can check the status of the printout by 
looking at whether the displayed block length is enclosed in brackets as 
described below.
[6.0cm]: Print will be the specifi ed length.
(6.0cm]: Print will be the specifi ed length, but text will be compressed 
horizontally.
6.0cm]: Print will be longer than that specifi ed length. (Text will be 
compressed 50% in the text direction. Print will be longer than specifi ed 
length.)

•  You can also check the printout with the Imager in the upper side of the 

display.

Input text. 

Press FORM.
•  If there is only one block in the label, advance to step 4.

Select ALL FORM and then press SET.

Use the 

 and 

 arrow keys to display the TAPE LENGTH setting 

screen.

Select FIX and then press the 

 

arrow key.

Specify the length of the label and then press SET.
•  Direct input of values is also supported.

The message ERROR will appear on the display if the text you input 
is incompatible with the length setting. You can check the status of the 
printout by looking at whether the displayed tape length is enclosed in 
brackets as described below.
[10.5cm]: Print will be the specifi ed length.
10.5cm]: Print will be longer than that specifi ed length.

This highlights the value.