Toshiba B-EX Manuale Utente
49
[802.11b] Group
[Channel]:
Set a channel for IEEE 802.11b.
The printer corrects channels that cannot be used due to country code settings.
The printer corrects channels that cannot be used due to country code settings.
Default 1
Range
Range
1 to 14
[Baud Rate]:
Select the maximum transmission rate for IEEE 802.11b.
The transmission rate is adjusted to a value enabling communication by the communicating device.
The transmission rate is adjusted to a value enabling communication by the communicating device.
Default 11
Mbps
Options
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
[802.11g] Group
[Channel]:
Set a channel for IEEE 802.11g.
The printer corrects channels that cannot be used due to country code settings.
The printer corrects channels that cannot be used due to country code settings.
Default 1
Range
Range
1 to 13
[Baud Rate]:
Select the maximum transmission rate for IEEE 802.11g.
The transmission rate is adjusted to a value enabling communication by the communicating device.
The transmission rate is adjusted to a value enabling communication by the communicating device.
Default 11
Mbps
Options
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps,
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
[Priority AP] Group
[Property]:
Select ANY SSID/priority AP.
Default 11
Mbps
Options
ANY SSID OFF, ANY SSID ON / Priority AP OFF,
ANY SSID ON / Priority AP ON / Other AP OFF,
ANY SSID ON / Priority AP ON / Other AP ON
ANY SSID ON / Priority AP ON / Other AP OFF,
ANY SSID ON / Priority AP ON / Other AP ON
[MAC Address 1] [MAC Address 2] [MAC Address 3] [MAC Address 4] [MAC Address 5]:
Set MAC addresses for access points that you want to connect preferentially.
The numbers indicate order of priority.
Connection to the MAC addresses is made in the order of descending priorities.
Use 12 characters from "0" to "F" to enter addresses.
Entries are not case-sensitive.
When no address is entered, you can disable the current settings.
The numbers indicate order of priority.
Connection to the MAC addresses is made in the order of descending priorities.
Use 12 characters from "0" to "F" to enter addresses.
Entries are not case-sensitive.
When no address is entered, you can disable the current settings.
[Authentication] Group
[(1) Connection Mode]:
Select the connection mode.
Default Infrastructure
Options Adhoc,
Options Adhoc,
Infrastructure
[(2) Encryption]:
Select the encryption scheme.
Displayed options depend on the [(1) Connection Mode] settings.
Displayed options depend on the [(1) Connection Mode] settings.
Default Disable
Options
Options
Disable, WEP40, WEP104, TKIP, AES
[(3) Network Authentication]:
Select the network authentication system.
Displayed options depend on the [(1) Connection Mode] and [(2) Encryption] settings.
Displayed options depend on the [(1) Connection Mode] and [(2) Encryption] settings.
Default Open
System
Options
Open System, Shared Key, WPA-EAP, WPA-PSK, WPA2-EAP, WPA2-PSK