Toshiba GD-1300 Manuale Utente

The machine has two modes for sending faxes: memory transmission and direct transmission. To change modes, 
press the [MEMORY] key. The MEMORY indicator lights up when memory transmission is selected, and goes off 
when direct transmission is selected.

Transmission takes place as follows in each mode:

When a fax is sent from the RADF and there are no previously stored fax jobs and no job in progress (the telephone 
line is not being used), dialing and scanning begin at the same time. Each page is transmitted after it is scanned. 
This transmission method is called Quick Online transmission.
If there are previously stored fax jobs or a job in progress, or the fax is being sent from the document glass, the fax 
is temporarily scanned into memory before transmission.

The fax is sent directly after the destination is dialed and the connection established.
The machine memory is not used for direct transmission, and thus direct transmission is possible even when the 
memory is full.

When a fax is sent by transmission reservation (p.70), broadcast transmission (p.71), broadcasting using a Group 
key (p.72), or timer transmission (p.79), the fax is scanned into memory before transmission.

• A fax job cannot be stored while a direct transmission is in progress.
• Only one page can be sent from the document glass by direct transmission.
• A subsequent function cannot be used while a direct transmission is in progress.

Transmission reservation (p.70), broadcast transmission (p.71), broadcasting using a Group key (p.72), or timer 
transmission (p.79)

MEMORY indicator