Toshiba GD-1300 Manuale Utente

Pagina di 104
49
INITIAL SETTINGS
2
If Quiet Detect Time is not working properly...
With some answering machines, there is simply no Quiet Detect Time that will allow both reception of faxes and 
uninterrupted voice messages. Even in this case, however, you can set up the machine to receive both phone and 
fax messages from callers on touch-tone lines. Follow this procedure:
1. Set the Quiet Detect Time to 00.
2. Alter your phone message to tell callers that they can send a fax by pressing the Remote Reception Number 
(factory set to 5), followed by the "
" key twice.
ANSWERING MACHINE BACKUP
There may be times when the tape on your answering machine becomes full, or 
when the answering machine itself malfunctions. It is still possible to receive faxes even under these conditions, by 
turning on the Auto Receive function. The machine will automatically answer all calls after five rings. To use this 
function, follow the procedure below.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
until "6:A.M. MODE" appears, and 
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
until "2:AUTO RECEIVE" appears, and 
then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
to select "1:ON" or "2:OFF".
Select "1:ON" to enable 
the function.
Select "2:OFF" to disable 
the function.
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to 
exit.
"6:A.M. MODE"
Selection
"2:AUTO RECEIVE"
Selection
If you are using Auto Receive, make sure that your answering machine is set to answer on four rings or less. 
Otherwise, the machine will take over all calls, preventing callers from leaving voice messages. 
Note