Toshiba GD-1300 Manuale Utente
58
HOW TO USE THE FAX FUNCTION
TWO-SIDED ORIGINAL TRANSMISSION FUNCTION
(when an RADF is installed)
(when an RADF is installed)
The RADF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated
180° before transmission.
180° before transmission.
Follow these steps to fax a two-sided original:
1
Place the original(s) in the RADF.
(p.52)
(p.52)
For the size and weight of
two-sided originals that
can be scanned using the
RADF, see page 50.
two-sided originals that
can be scanned using the
RADF, see page 50.
2
Press the [2-SIDED TX] key until the
appropriate setting appears.
appropriate setting appears.
The selections are as
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)
Select the setting according to the original type
(booklet or tablet) as indicated below. If the setting is
incorrect, every other page of the received fax will be
inverted.
(booklet or tablet) as indicated below. If the setting is
incorrect, every other page of the received fax will be
inverted.
If you are faxing a
two-sided booklet type
original, select "ON
(ROTATE)".
two-sided booklet type
original, select "ON
(ROTATE)".
If you are faxing a
two-sided tablet type
original, select "ON
(NON-ROTATE)".
two-sided tablet type
original, select "ON
(NON-ROTATE)".
To cancel this function, select "OFF".
3
Press the [ENTER] key.
• The original must be placed in the RADF when using the two-sided original transmission function. The
document glass cannot be used.
• The two-sided original transmission function cannot be selected when direct transmission mode is selected.
Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is
selected.
selected.
Note
Original face up
Booklet
Tablet