Toshiba GA-1190 Manuale Utente

Setup Flow for Printing Features    13

This section describes the minimum setup flow to configure this equipment for printing.

This equipment supports Raw TCP printing, LPR printing, IPP printing, and Novell printing for 
Windows computers. The configurations required are different for each printing system.
If you are not sure which printing system you will use, choose the proper printing system accord-
ing to operating systems of client computers in your network:

y

For Windows Me — IPP Printing

y

For Windows NT 4.0 — LPR Printing

y

For Windows 2000, Windows XP, Windows Server 2003, Windows Vista — Raw TCP or LPR 
Printing

Windows printing applies to the following Windows computers.

y

Display resolution
1024 x 768 dots or more

y

Display color
High Color (16bit) or higher is recommended

y

CPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)

y

Memory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0
128MB for Windows 2000/XP/Server 2003
512MB for Windows Vista

The applicable computers depend on the printing systems:

y

Raw TCP or LPR printing
Windows NT 4.0 Service Pack 6a (LPR printing only)
Windows 2000 Service Pack 4
Windows XP Service Pack 1 / Service Pack 2
Windows Server 2003 Service Pack 1 or later
Windows Vista Service Pack 1

y

IPP printing
Windows Me
Windows 2000 Service Pack 4
Windows XP Service Pack 1 / Service Pack 2
Windows Server 2003 Service Pack 1 or later
Windows Vista Service Pack 1

Printing can be performed via a Windows/NetWare print server on Windows 98. Only when 
the IPP client "wpnpins.exe" provided by Microsoft Corporation has already been installed, 
can you use the IPP printing system after installing a driver by following the same procedure 
as that of Windows Me.