Toshiba GA-1190 Manuale Utente

Equipment Detection and Printing Check    55

When you are unable to print to this equipment, network printing services have not been set up 
correctly, or this equipment has not been properly configured to operate in your network environ-
ment. The following checklist will help you identify the source of the error and direct you to infor-
mation solving the issue.

1

Have you set the protocol 
settings so they are compat-
ible with your network and 
client computer protocol 
settings?
If data sent from a specific 
computer through a network 
to this equipment are suc-
cessfully printed, this could 
be a network configuration 
error, not a hardware mal-
function or the incorrect 
connection of this equip-
ment.

Next Step

Ø

Ö

Set up the proper protocol.

2

Have you set up the appro-
priate type(s) of print ser-
vices should be supported?

Next Step

Ø

Ö

Check the settings required for 
your printing environment.

3

If you are using Novell print 
services, did you set up the 
Novell side of network print-
ing, such as creating print 
servers and attaching the 
print queue?

Next Step

Ø

Ö

Set up the NetWare server.

4

If you set up Novell print 
services, can you see the 
print job using PCONSOLE 
or NWAdmin?

Next Step

Ø

Ö

Refer to your Novell PCONSOLE 
or NWAdmin user documentation 
for help with using these utilities.

5

Have you checked the gate-
way and subnet settings to 
make sure this equipment is 
part of the same network 
Gateway as the client com-
puter from which you are 
trying to print?

Next Step

Ø

Ö

Set up the TCP/IP correctly.

6

Are other services and com-
munications performed over 
the network behaving in the 
normal and expected man-
ner?

Ö

Refer to your network documen-
tation or use a network diagnostic 
utility to research a network prob-
lem.