Toshiba DP80F Manuale Utente
95
This procedure will discuss Di-
rect Transmission when se-
lected as the default setting or
when Residual Memory has
been depleted.
rect Transmission when se-
lected as the default setting or
when Residual Memory has
been depleted.
Load the document face down
in the Document Support (see
page 82).
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
trast if desired (see pages 83
and 84).
Dial the facsimile number of the
remote party using any of the
four dialing methods.
remote party using any of the
four dialing methods.
•
One Touch Key Dialing
... See page 89
... See page 89
•
Abbreviated Dialing
... See page 90
... See page 90
•
Alphabet Dialing
... See page 91
... See page 91
•
Keypad Dialing
... See page 92
... See page 92
•
Press
if a dialing er-
ror occurs.
Example of screen displayed
while a number is entered using
Keypad Dialing:
while a number is entered using
Keypad Dialing:
Once the facsimile number is
entered, the dialing starts.
entered, the dialing starts.
Direct Transmission is used if
there is not enough residual
memory or when a large num-
ber of document pages are to
be sent, etc.
there is not enough residual
memory or when a large num-
ber of document pages are to
be sent, etc.
This mode is also useful if the
operator wishes to visually con-
firm the actual transmission of
the document to the remote par-
ty.
operator wishes to visually con-
firm the actual transmission of
the document to the remote par-
ty.
The documents will remain in
the ADF and be transmitted one
by one.
the ADF and be transmitted one
by one.
Direct Transmission
Load the Document
1
Dial the Facsimile
Number
Number
2
Start Dialing
3
Direct Transmission as Default Setting
Line Connection to
the Remote Party
the Remote Party
4
Once connected to the destina-
tion facsimile, the screen below
is displayed.
tion facsimile, the screen below
is displayed.
MAY-17 09:43 AM 100%
AUTO RECEIVE
Example of screen displayed
when Residual Memory has
been depleted:
when Residual Memory has
been depleted:
MAY-17 09:43 AM 0%
AUTO RECEIVE
TEL NUMBER =(MAX128)
0559761234
DIALING
0559761234
If the destination facsimile is
busy, the screen below is dis-
played.
busy, the screen below is dis-
played.
WAITING TO REDIAL
AUTO RECEIVE
If the redial procedure is com-
pleted without a success, the
screen below is displayed and
printed the Transmission Re-
port.
pleted without a success, the
screen below is displayed and
printed the Transmission Re-
port.
MAY-17 09:43 AM 100%
PRINTING LIST
After printing
MAY-17 09:43 AM 100%
LINE BUSY
COMMUNICATING
+81 559 761234