OKI 4580 Manuale Utente
Problem Solving
69
5 Place the image drum unit back into your
machine. Ensure that the tabs on both sides of
the image drum are inserted correctly as
shown below. Then press down firmly on both
ends of the image drum until it snaps into
place.
the image drum are inserted correctly as
shown below. Then press down firmly on both
ends of the image drum until it snaps into
place.
Fig11_08.eps
Warning: Never expose the image drum unit to
light for more than 5 minutes. Never
expose the image drum unit to direct
sunlight. Always hold the image
drum unit by the ends. Never touch
the surface of the green drum inside
the image drum unit.
expose the image drum unit to direct
sunlight. Always hold the image
drum unit by the ends. Never touch
the surface of the green drum inside
the image drum unit.
6 Close the top cover.
Fig11_09.eps
7 Close the control panel. Press down until it
snaps into place.
Fig11_10.eps
8 Pull the paper out of the paper tray. If any of
the paper is damaged, remove and replace it.
Fig11_11.eps
9 Reload the paper into the paper tray.
Fig11_12.eps