Brother FAX-222 Manuale Utente

Pagina di 99
 
2 - 2
 
      L O C A T I O N   A N D   C O N N E C T I O N S
 
Choosing a Location
 
Place your fax machine on a flat, stable surface, such as a desk. Select a place that is 
free of vibration and shocks. Locate the fax machine near a telephone jack and a 
standard, grounded power outlet.
 
Assembly
Load the recording paper
1
Open the cover by 
placing your finger in the 
groove under the cover 
and lifting up.
2
Pull up the blue release lever so you can remove the three protective sheets (initial set 
up) or any paper remaining in the machine from the last roll.
3
Unwrap the new recording paper roll and insert it into the paper bin, with the paper 
feeding from the bottom of the roll.
Avoid placing your machine in a high-traffic area. Do not place near heaters, air 
conditioners, water, chemicals or refrigerators. Do not expose the fax machine to 
direct sunlight, excessive heat, moisture or dust. Do not connect your machine to 
electrical outlets controlled by wall switches or automatic timers. Disruption of power 
can wipe out information in the unit’s memory. Do not connect your machine to 
electrical outlets on the same circuit as large appliances or other equipment that might 
disrupt the power supply. Avoid interference sources, such as speakers or the base 
units of cordless phones.
Limited to 
2.76 inches (70 mm)