Brother FAX-222 Manuale Utente

      I N I T I A L   S E T U P

You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When 
the beeper is set to LOW or HIGH, the fax machine beeps every time you press a key 
or make an error, and at the end of fax sending or receiving.

Press 

, 

, 

.

Press 

 or 

 to select your setting and press 

.

Press 

 to exit.

You can adjust the speaker volume when your fax machine  is on hook (after you 
pressed 

or

), by selecting a speaker volume level.

Press 

 or 

 to adjust the volume level. The display shows the setting you are 

choosing. Each key press changes the volume to the next setting. The new setting will 
remain until you change it again.

You can adjust the ring volume when your fax machine is idle. You can select a ring 
volume level or press until the ring is off. 

Press 

 or 

 to adjust the volume level. With each key press, the fax machine 

rings so you can hear the current setting and the display shows the setting you are 
choosing. Each key press changes the volume to the next setting. The new setting will 
remain until you change it again.

In the event of a power failure, all settings in the INITIAL SETUP, SETUP 
RECEIVE, SET AUTO DIAL, REMOTE FAX OPT and SETUP MSG CTR plus the 
COVERPG SETUP and COVERPAGE MSG (from SETUP SEND) functions are 
stored permanently. You may have to reset the date and time.

If you have FAX-333MC, you can adjust the speaker volume while you are listening 
to your OGM (Outgoing Message) and ICMs (incoming messages).

If you turn Incoming Recording Monitor to OFF (

, 

, 

) on the 

FAX-333MC, the Speaker for screening calls will be disabled and you won’t hear 
callers leaving messages. The volume for other operations can still be controlled 
using  

and  .