Brother FAX-222 Manuale Utente
13 - 2
T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
6
Plug in the power cord.
7
Load the fax paper again, and push the blue release lever down. Close the cover.
The other party has disconnected during a call or
fax. Try calling the other party.
fax. Try calling the other party.
The documents were not inserted or fed properly,
or were too long or too short.
or were too long or too short.
1
Open the cover.
2
Pull the documents toward the front of the fax machine, in the same direction they
were feeding.
were feeding.
3
Close the cover.
Contact your Brother Dealer for service,
The number you called does not answer or is
busy. You may also have reached a number not
connected to a fax. Check the number and call
again.
busy. You may also have reached a number not
connected to a fax. Check the number and call
again.
You’ve tried accessing a One Touch or Speed
Dial location with no number assigned to it. See
chapter 7 for information about storing One
Touch and Speed Dial numbers.
Dial location with no number assigned to it. See
chapter 7 for information about storing One
Touch and Speed Dial numbers.
The paper roll is empty; follow the instructions in
Installation to replace the paper roll.
Installation to replace the paper roll.
DISCONNECTED
CHECK DOCUMENT
REMOVE DOCUMENT
CHECK DOCUMENT
PRESS STOP KEY
REMOVE DOCUMENT
CHECK DOCUMENT
PRESS STOP KEY
Front cover
CALL BROTHER CS
MACHINE ERROR XX
MACHINE ERROR XX
NO RESPONSE/BUSY
NOT REGISTERED
PAPER ROLL EMPTY
RELOAD PAPER
RELOAD PAPER