Canon MPC600F/400 Manuale Utente

There are two methods of redialling: Manual redialling and Automatic redialling. This section explains these 
two methods.

■

Press 

 to dial the last number you  dialled with the numeric buttons. (This starts redialling 

regardless of whether automatic redialling is enabled.)

To cancel manual redialling, press 

.

■

The fax automatically redials after the first attempt at sending fails (e.g., the line is busy).
The number of redialling attempts and the time interval between attempts can be adjusted by changing the 
settings in the 

AUTO REDIAL

 setting. Automatic redialling can also be set off and on. (

→

 p. 9-5)

If all attempts are unsuccessful, the machine cancels the transmission and prints an ERROR TX REPORT. 
(

→

 p. 7-3)

• You can also set the automatic redialling feature from the MultiPASS Suite. (

→

 MultiPASS Suite User’s Guide)

When automatic redialling is in use, the LCD alternately displays 

AUTO REDIAL

 and the transaction number 

(

TX/RX NO.

) while it is waiting to redial.

• If you want to cancel a transmission while the machine is waiting to redial, you will have to delete the document from 

memory. (

→

 p. 4-15)

Wait until the machine begins redialling.

Press 

.

• The machine asks you to confirm that you want to cancel.

Press 

to cancel redialling.

• If you change your mind and want to continue redialling, press 

.

• The machine prints an ERROR TX REPORT. (

→

 p. 7-3)

Ex:

27/12 2002 FRI 15:30
DIALLING

Ex:

27/12 2002 FRI 15:30

20 545 8545

CANCEL?
YES=( )

NO=(#)