Dialogic 6.2 Manuale Utente

modinfo

November 2009

156

If a raw G3 file has a 128-byte Brooktrout header (it is a btG3 file), 

mktiff uses the resolution, width, and number of scan lines from the 

header when storing the information for that page in the new TIFF 

file. If it does not encounter a header or if the number of scan lines is 

0, mktiff counts the actual number of scan lines in the G3 input file.

The modinfo program lists information about active hardware and 

software modules maintained within the driver.

The modinfo program is found in the bapp.src directory.

Each module found is listed, along with whatever hardware or 

channel information is available. If a module has been marked by 

the driver as dead, it is listed as *DEAD*.

Configuration values shown when using the -c option is supplied to 

firm or firmload applications when downloading type 2 (PROC_APP) 

firmware.

Configuration information from the module’s PCI configuration 

space is displayed using the -p option.

The number of channels listed is the total number of channels 

supported by the module, including its administrative channel. The 

total is normally one more than the number of work channels, which 

are mapped into ordinal channel numbers.

-p

List PCI configuration information.

-c

List firmware configuration options.

mod

Module number whose status is to be 

printed, otherwise all.

-s

Display cPCI slot and CPU information.

-h

Display hardware resource information.

-H

Display the hardware information reported 

by the firmware.

-a

Use all previous options.