Dialogic 6.2 Manuale Utente

Making Hookflash Transfers

November 2009

181

To configure using configuration files:

„

Set the port configuration for 

T1 RBS

 using the callctrl.cfg 

configuration file:

port_config=t1_robbed_bit

or for 

Analog

, set:

port_config=analog

„

Set the protocol file for 

T1 Robbed Bit

 using the callctrl.cfg 

configuration file:

protocol_file=C:\Brooktrout\Boston\config\winkstart.lec

and for 

Analog

, the protocol file is:

protocol_file=C:\Brooktrout\Boston\config\analog_loopstart_us.lec

„

Set the transfer_variant using the callctrl.cfg configuration 

file:

transfer_variant=hookflash

„

The flash duration is set:

flash_hook_duration=50

„

Set the country code using the btcall.cfg configuration file:

country_code 0010

Country codes are listed in:

C:\Brooktrout\Boston\bfv.api\inc\ccode.h

Hookflash transfer is the only analog explicit call transfer method.

In T1 and analog BSMI applications, use L4L3mTX_HOOKFLASH 

to set the duration of the hookflash signal. The field to set the signal 

is:

L4_to_L3_struct.data.signal_duration_data = 0;

The duration of the hookflash signal is in milliseconds. The default 

value is 0, which is equal to 500ms in duration. The maximum 

setting is 64k.

For more information on the 

Brooktrout Configuration Tool

, refer to the 

chapter on using the configuration tool in the installation and 

configuration guide that came with your software.