Canon B640 Manuale Utente

62

Sending a document to more than one location

Sequential broadcasting sends one document to more than one location.

You can send to a total of 31 destinations as follows:

One-touch Speed Dialing

=

10 destinations

Coded Speed Dialing

=

20 destinations

Regular dialing (Numeric buttons dialing) =

  1 destination

You can enter the One-touch Speed Dialing and Coded Speed Dialing destinations in
any order. You simply press the One-touch Speed Dialing button, or press [CODED
DIAL] followed by the two-digit code (with the numeric buttons).

You can also include one destination using Regular dialing. Remember that when
using regular dialing, you must press [START/COPY] after entering the number.

You can send up to 21 letter-size pages (based on the CCITT#1 Chart—standard
resolution).

See Loading the document, p. 45.
You can set the resolution and density. See p. 47.

❚ You can send to up to 31 destinations.
❚ Simply enter the numbers one after the other: press

the desired One-touch Speed Dialing button or
press [CODED DIAL] followed by the two-digit
code (with the numeric buttons).

❚ You can enter only one number directly with the

numeric buttons using regular dialing. Remember
to press [START/COPY] after entering the number.

❚ You can also press [REDIAL/PAUSE] to redial the

last number dialed with the numeric buttons.

❚ You must press each button within 10 seconds of

the preceding one. The FAXPHONE begins the
operation approximately 10 seconds after you press
the last button.

❚ The FAXPHONE reads the document into memory

and begins sending. Between transmissions,
MULTI TRANS ON displays on the LCD.

❚ To cancel a transmission, press [STOP] during

dialing or transmission. All transmissions in the
sequence are canceled.

STANDARD

TEL=

3456 7890

TX/RX NO.

XXXX

MEMORY INPUT P01