Ricoh 2000 Manuale Utente
Transmission
22
1
A
Make sure that Immediate Trans. indicator is lit.
If Memory Trans. indicator is lit, press the {Transmission Mode} key to select
Immediate Transmission mode.
Immediate Transmission mode.
B
Place the original.
C
Select the scan settings you require.
D
Using the number keys or a Quick Dial key, specify a destination.
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
Keys”.
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
E
Press the {Start} key.
The machine dials a destination.
The machine dials a destination.
Note
❒ Documents are not stored in memory.
Reference
p.43 “Original Type”
p.44 “Resolution”
p.45 “Image Density (Contrast)”
p.47 “Sending Over a Fax Line”
p.49 “Sending by IP-Fax”
p.58 “Specifying a destination using the Quick Dial key”
p.59 “Specifying a group of destinations using the Quick Dial key”
p.62 “Redial”
p.43 “Original Type”
p.44 “Resolution”
p.45 “Image Density (Contrast)”
p.47 “Sending Over a Fax Line”
p.49 “Sending by IP-Fax”
p.58 “Specifying a destination using the Quick Dial key”
p.59 “Specifying a group of destinations using the Quick Dial key”
p.62 “Redial”
ARX023S