Barco 26-0503000-00 Manuale Utente

Control GUI Installation

The MatrixPRO 8x8 DVI Router Control GUI is an interactive Graphical User Interface 
application designed to assist users with MatrixPRO operation.  The software is only 
available via download from either the Barco Folsom website or the FTP server.  

The following step-by-step instructions will enable you to install the MatrixPRO Control GUI 
in a Windows

®

 2000 or XP PC.  Use the figures for reference during the procedure.

„

Use the following steps to install the MatrixPRO control GUI:  

1.  Verify that your PC meets all hardware and software requirements for running the 

GUI.  These are identical to the requirements for downloading software.  In 
Chapter 6, refer to the “

” section on page 78 and the 

“

” section on page 78 for details.

2.  Download the MatrixPRO software.  In Chapter 6, refer to the “

” section on page 79 for instructions.

3.  With the download complete, navigate to the target folder and double-click the 

EXE to launch the installation shield.  

4.  Follow the prompts to install the upgrade package in the default folder.  At the 

conclusion of the procedure, a new path will be created under Start > Programs > 
Barco Folsom.  

The MatrixPRO Control GUI software is included within the 
“System Software” download.

This procedure will not be required if you have already 
downloaded system software — for purposes of upgrading 
the MatrixPRO’s code.  In this case, the GUI is automatically 
installed when you run the System Software executable.