Multitech MT5600ZDX Manuale Utente

5. Turn on power by flipping the "ON/OFF" switch (on the side of the

modem) to the "ON" position.

6. Make sure modem and computer/terminal serial port baud rates are

adjusted.  (Note that several programs can check this for you.  If you have

MS-DOS 5.0 or higher, a program called MSD.EXE [Microsoft Diagnostics]

is in your DOS directory.  Typing MSD at the DOS prompt brings up a screen

that provides a variety of information about your computer.  Select COM

ports and it lists information about your com port, e.g., UART Type, Address,

and IRQ, to name a few.  Once you know your serial port's UART type, you

can set your communications software appropriately.)

7. Proceed to Chapter 3 of this manual, or to your data communications

software manual.