Pinnacle PCTV SAT CI PCI DVB-S DE EN NL Ret +rem 202261451 Manuale Utente
Codici prodotto
202261451
6
PCTV Sat (CI)
Software
Windows 98SE, Windows Millennium Edition, Windows 2000 or
Windows XP.
If you want to use PCTV WebText, the Internet Explorer (4.0 or higher)
has to be installed on your computer.
Video devices
S-Video input and composite video input:
The PCTV Sat board connects to any video source (VCR, video camera,
laserdisk) generating a composite video or S-Video signal in PAL,
NTSC, or SECAM quality, e.g. VCR, camcorder, or video camera,
independently of the video system you use (e. g. VHS, S-VHS, Hi8,
Video 8).
laserdisk) generating a composite video or S-Video signal in PAL,
NTSC, or SECAM quality, e.g. VCR, camcorder, or video camera,
independently of the video system you use (e. g. VHS, S-VHS, Hi8,
Video 8).
ST1
ST7
Tuner
Video
Decoder
Antenna
input
Composite
Video input
S-Video
input
Antenna
loop-through
Demodulator
PCTV Sat - Boardlayout
Antenna/cables
Connect the LNB to the Antenna Input of the PCTV Sat Board. To do
this you require a satellite antenna cable.
If you have a separate analog/digital satellite receiver available, you can
connect this to the antenna throughput connector on the board. This
alternative means that a satellite signal will still be available for the
standalone receiver, even if the PC has been switched off or the
PCTV Sat Board is not active. This also requires the use of a satellite
antenna cable.
alternative means that a satellite signal will still be available for the
standalone receiver, even if the PC has been switched off or the
PCTV Sat Board is not active. This also requires the use of a satellite
antenna cable.
To connect video devices to the PCTV Sat board, you need suitable
cables (RCA or S-Video cables).