Zoom 5695 Manuale Utente

 

 

ADSL X6v User Guide 

98 

The Ethernet Ports 1-4 on the back of 
your modem. 

Shows how your Ethernet ports are set 
up. 

A check mark indicates that the 
Ethernet port is connected. 

If you are having problems establishing 
your Ethernet connection, try setting the 
Speed/Duplex value to match that of 
the Ethernet NIC in your computer.  

Most users do not need to set up static routes. The default route 
used in your modem will forward all packets correctly. However, if 
you set up your network with different subnets, you can use static 
routing to ensure your packets are handled correctly.  
You can manually create a static route to tell the modem how to 
reach a specific IP network. The route entry specifies a destination 
network (or single host), together with a mask to indicate what 
range of addresses the network covers, and a next-hop gateway 
address or interface. If there is a choice of routes for a destination, 
the route with the most specific mask is chosen.  
To route to a destination that is not on any local network, a route 
may be added via a gateway, for instance another router. The 
gateway IP address must be on the same subnet as one of the 
router's interfaces.