BlackBerry 1902G Manuale Utente

2. Slide the SIM card holder in the direction of the arrow to unlock it, and then lift the cover open.

3. Slide the SIM card into the cover with the conductive side facing the leads on the board. The 

notched end of the SIM card should align with the notch in the SIM card holder.

4. Close the cover. Slide the cover in the reverse direction of the arrow to lock it into place.

The Integrator Kit includes a high-performance, 3 dBd-gain magmount antenna, which is 
terminated by a screw-on SMA plug. The radio modem includes a snap-on MMCX jack.

1. Insert the antenna into the base. Turn the antenna until the two components are securely 

fastened.

2. Insert the SMA cable connector into the MMCX connector and turn the SMA connector until the 

two components are securely fastened.

3. Insert the MMCX connector into the radio modem’s MMCX jack.

4. Position the antenna for optimal coverage. The magmount antenna provides optimum RF 

performance when it is placed on a broad metal surface, such as the roof of a car. If you are 
using the antenna inside a building, place the antenna near a window.

Plug the 5VDC, 2.4A, center-pin-positive power adapter into a wall outlet. Connect the other end to 
the Interface and Test Board’s power jack.

Turn the switch to the 

TURNON

 position to allow the transceiver of the radio modem to power up. 

When the transceiver is on, the LED marked 

ONI

 is lit

Insert the microphone plug into the microphone jack. Insert the speaker plug into the speaker jack.