Roland Fantom-S88 Manuale Utente
![Roland](https://files.manualsbrain.com/attachments/0f4c16ad543d01443d705a6df0a922f055403287/common/fit/150/50/3f2e1fe174f8814c1395beda0db29618b95ef95d02ed697f721709eb4377/brand_logo.png)
16
Panel Descriptions
Rear Panel
fig.00-02
fig.00-03
POWER ON Switch
Press to turn the power on/off.
→
(Quick Start; p. 4)
AC Inlet
Connect the included power cord to this inlet.
→
(Quick Start; p. 3)
SmartMedia card slot
Insert a SmartMedia card (3.3V, maximum 128 MB) here.
USB Connector
This connector lets you use a USB cable to connect your computer to
the Fantom-S.
the Fantom-S.
→
fig.00-04
CTL (CONTROL) PEDAL Jack
You can connect optional expression pedals (DP-8, etc.) to these
jacks. By assigning a desired function to a pedal, you can use it to
select or modify sound or perform various other control. You can
also connect optional pedal switches (DP series etc.) to sustain
sound.
jacks. By assigning a desired function to a pedal, you can use it to
select or modify sound or perform various other control. You can
also connect optional pedal switches (DP series etc.) to sustain
sound.
→
(Quick Start; p. 26)
HOLD PEDAL Jack
An optional pedal switch (DP series etc.) can be connected to this
jack for use as a hold pedal.
jack for use as a hold pedal.
→
(Quick Start; p. 26)
This can also be set so it supports the use of half-pedaling
techniques. So, after connecting an optional expression pedal (DP-8,
etc.), you can employ pedal work to achieve even finer control in
performances in which piano tones are used.
techniques. So, after connecting an optional expression pedal (DP-8,
etc.), you can employ pedal work to achieve even finer control in
performances in which piano tones are used.
→
fig.00-05
MIDI Connectors (IN, OUT, THRU)
These connectors can be connected to other MIDI devices to receive
and transmit MIDI messages.
and transmit MIDI messages.
fig.00-06
DIGITAL OUT Connectors
(S/P DIF OPTICAL, S/P DIF COAXIAL)
(S/P DIF OPTICAL, S/P DIF COAXIAL)
The Fantom-S features both optical and coaxial digital out
connectors (conforming to S/P DIF).
These connectors output a digital audio signal (stereo). The output
signal is identical to the signal that is output from the OUTPUT A
(MIX) jacks.
connectors (conforming to S/P DIF).
These connectors output a digital audio signal (stereo). The output
signal is identical to the signal that is output from the OUTPUT A
(MIX) jacks.
* S/P DIF is a digital interface format used for consumer digital audio
devices.
fig.00-07
OUTPUT A (MIX) Jacks (L (MONO), R)
These jacks output the audio signal to the connected mixer/amplifier
system in stereo. For mono output, use the L jack.
system in stereo. For mono output, use the L jack.
→
(Quick Start; p. 3)
OUTPUT B Jacks (L, R)
These jacks output the audio signal to the connected mixer/amplifier
system in stereo.
system in stereo.
INDIVIDUAL 1–4 Jacks
These jacks output audio signals in mono to an amp or mixer.
The setting determining whether these jacks are used as stereo
OUTPUT jacks or monaural INDIVIDUAL jacks is made with the
Output Assign setting (p. 176, p. 176).
The setting determining whether these jacks are used as stereo
OUTPUT jacks or monaural INDIVIDUAL jacks is made with the
Output Assign setting (p. 176, p. 176).
AUDIO INPUT Jack (L, R)
Accept input of audio signals in stereo (L/R) from external devices.
If you want to use mono input, connect to the L jack.
When recording from a mic, connect it to the L jack, and set Input
Select (p. 118) to “MICROPHONE.”
If you want to use mono input, connect to the L jack.
When recording from a mic, connect it to the L jack, and set Input
Select (p. 118) to “MICROPHONE.”
PHONES Jack
This is the jack for connecting headphones (sold separately).
→
(Quick Start; p. 3)
Reference_e.book 16 ページ 2003年7月14日 月曜日 午後3時25分