Primera Technology Max Manuale Utente

Optical Disc Laminator Connection Guide

THANK YOU…

Thank you for purchasing the Optical Disc Laminator

Connectivity Kit.  This kit will allow you to use your Optical

Disc Laminator in conjunction with the Pro, XL and MAX

versions of Optical Disc Duplicators.  This guide will explain

the connection of the Laminator to these systems, the

installation of software and the running of disc jobs.  

A. UNPACKING AND INSPECTION

While unpacking your Laminator Connectivity Kit make sure

that all supplied accessories are included with your kit.  The

following items are included:

•

Laminator Stand

•

Software Installer Disc

•

USB Cable

•

6-Pin Mini Circular Cable (Pro/XL Stand only)

•

Warranty Statement, Manual and other documentation.

B. INSTALLING THE LAMINATOR SOFTWARE DRIVER

When using the Laminator with a Primera Technology Disc

Duplicator it will be necessary to install a driver. This driver

will allow the PC to control the functions of your Laminator.

Because your Disc Laminator is a plug-and-play device, do not

connect the Laminator's USB cable to the PC until instructed to

do so by the installer. The driver is installed as follows: 

a. This installer will reboot your system so make sure all

applications are closed. Insert the Software Driver Install

disc into your PC's CD-ROM drive

b. The Installer Quick Start program should launch. If it does,

proceed to step c. If not, please follow these steps:

•

Click the Start button in the lower left hand side of the

screen, and then select My Computer from the menu.

•

Double-click the Disc Laminator Installer Icon.

c. Choose the Duplicator you are using, either Duplicator

XL/Pro or Duplicator MAX.

d.  You will now be prompted to install and update to Primo

DVD that will allow you to print, record and laminate

unnatended.  Click Next to install the update.

510887.qxd  1/21/2004  7:35 PM  Page 1