Havis-Shields DS-DELL-221 Manuale Utente

Installation

1)

   Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws 

       (Hardware Kit Item 3).  Torque screws to 120 in-lbs (13.4Nm) ± 10%.

2)

   Lower the Docking Station to the Mounting Bracket as shown and secure with

       (4) M5 screws (Hardware Kit Item 4). Torque screws to 25 in-lbs (2.8 Nm) ± 10%.

1/4”-20 Screws

Mounting Bracket

Typical Motion Device Example

M5 Screws

We recommend applying a drop of medium strength (blue)

thread locking adhesive to the threads of all fasteners.

Cable Management

1)

  Tip the Docking Station forward to a position that is comfortable to work with.

2)

  Install all cables that are necessary for computing needs.

3)

  Use Zip Ties (Hardware Kit Item 1) to strain relieve cables to the Strain

      Relief Points at rear of Docking Station.

4)

  Gather all cables to one side and tie off to unused holes on underside

      of Docking Station.

Insert as many zip ties as

necessary to secure cables.