Panasonic CF-31 Manuale Utente

Getting Started

Touching the keyboard, touch pad or touchscreen (only for model with touchscreen)

Closing the display

Turn on/off the wireless switch

When the CPU temperature is high, the computer may not start up to prevent

overheating of the CPU. Wait until the computer cools down, and then turn the

power on again. If the computer does not power on even after cooling down,

contact Panasonic Technical Support ( pages 32 - 36).

Any changes from the default setting of the Setup Utility must not be made until

the First-time Operation is completed.

6 Setup

Windows.

Follow the on-screen instructions.

The computer restarts several times. Do not touch the keyboard or touch

pad, and wait until the hard disk drive indicator has turned off.

After the computer is turned on, the screen remains black or unchanged for

a while. This is not a malfunction. Wait for a moment until the Windows setup

screen appears.

During setup of Windows, use the touch pad and clicking to move the cursor

and to click an item.

Setup of Windows will take approximately 20 minutes.

Go to the next step, confi rming each message on the display.

“Join a wireless network” screen may not appear.

You can set the Wireless Network after the setup of Windows is complete.

CAUTION

You can change the user name, password, image and security setting after

setup of Windows.

Remember your password. If you forget the password, you cannot use Win-

dows. Creating a password reset disk beforehand is recommended.

Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,

COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-

count name) that includes the “@” mark, a password will be requested at the

log-on screen, even if no password has been set. If you try to log on without en-

tering a password, “The user name or password is incorrect.” may be displayed

and you will not be able to log on to Windows ( page 24).

<Only for model with touchscreen>

Perform the touchscreen calibration.

Before performing the calibration, close Tablet PC Input Panel.

Calibration by an administrator

NOTE

At fi rst, log on to Windows as an administrator and perform this calibration.

Click

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-

ting].

Click [Calibrate].

Using the stylus, touch each of the “+” target marks one by one, and then

click [Yes].

Click [OK].

Calibration by a standard user