Fujitsu 480 Manuale Utente

C122-E003-02EN

4-1

 

1

This chapter describes operations performed to run and manage the PRIMEQUEST-
series machine via the command line interface (CLI).

This section describes the command line interface (CLI) provided with the MMB.

The CLI can be accessed in either of the following two ways:

z Through the MMB serial port
z From a remote PC via the MMB management LAN

1 Connect the MMB to the user terminal (e.g., notebook PC) with an RS-232C 

cross cable.

2 Launch the terminal software (e.g., Windows HyperTerminal) on the 

terminal, and set up the terminal software as follows.

Table 4.1  Setting items of terminal software

3 Enter a user name and password to log in when the login prompt is displayed.

Setting item

Value

Bits per second

19200

Data bit

8

Parity

None

Stop bit

1

Flow control

None

Emulation

VT100