Fujitsu 480 Manuale Utente
7-64
C122-E003-02EN
GSWB
CHAPTER 7 Web-UI Operations
CHAPTER 7 Web-UI Operations
7.6.5
Flow Control window
The [Flow Control] window displays the current status of each port under flow
control and configures flow control settings. Configuration of port-channel settings is
not possible.
control and configures flow control settings. Configuration of port-channel settings is
not possible.
The same setting for both transmission and reception is suitable for point-to-point
links. Different settings are suitable for a connection between a hub and end node.
(The end system being stopped by the hub is desirable, but the hub being stopped by
the end system is not desirable.) For example, the "on-on" setting is suitable for a
connection between switches and the "on-off" or "off-on" setting is suitable for a
connection between a switch and end station.
links. Different settings are suitable for a connection between a hub and end node.
(The end system being stopped by the hub is desirable, but the hub being stopped by
the end system is not desirable.) For example, the "on-on" setting is suitable for a
connection between switches and the "on-off" or "off-on" setting is suitable for a
connection between a switch and end station.
An asterisk (*) displayed in the IO_Unit field of a partition indicates that the port
settings are not synchronized with the partition configuration.
settings are not synchronized with the partition configuration.
Only the settings of defined partitions are displayed under [Partition] in the window.
Figure 7.35 [Flow Control (IO_Unit)] window