Fujitsu 480 Manuale Utente

C122-E003-02EN

10-19

 

EFI

10.4 EFI Setup Menu

The SCSI Configuration Utility allows you to change the transfer rate and data width 
of the device for each SCSI channel.

Figure 10.14  Example of the displayed [LSI Logic Host Bus Adapters] window 

of the SCSI Configuration Utility

The SCSI Configuration utility assumes that the screen size is 80 x 25, while the 
Windows-provided HyperTerminal program assumes that the screen size is fixed at 80 
x 24.  Therefore, the top and bottom lines of the SCSI Configuration Utility window 
are not displayed.

In the SCSI Configuration Utility, you can use the keys listed in the table below, for 
example, to select items.

LSI Logic MPT SCSI Setup Utility  Version  v1.05.00.00

F1/Shift+1 =Help  ArrowKeys/H,J,K,L =Select Item    -/+ =Change [Item]
 Esc=Exit Menu     Home(I)/End(O) =Select Item       Enter=Execute <Item>

LSI Logic Host Bus Adapters
Adapter     PCI  PCI  PCI    RAID   FW Revision  Pro-  LSI      RAID       IRQ
             Bus  Dev  Fnc    Alert               duct  Control  Status
<53C1030     04   02   00>   ----    1.03.11.00  IO    Enabled  ---------   0