HP (Hewlett-Packard) E2S18UAABA Manuale Utente
System board
NOTE:
The system board spare part kit includes replacement thermal material.
Description
Spare part number
Equipped with an AMD A6-1450 processor, a graphics subsystem with UMA memory, and the
Windows 8 Standard operating system
Windows 8 Standard operating system
730894-501
Equipped with an AMD A6-1450 processor, a graphics subsystem with UMA memory, and the
Linux operating system
Linux operating system
730894-001
Equipped with an AMD A4-1250 processor, a graphics subsystem with UMA memory, and the
Windows 8 Standard operating system
Windows 8 Standard operating system
730893-501
Equipped with an AMD A4-1250 processor, a graphics subsystem with UMA memory, and the
Linux operating system
Linux operating system
730893-001
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
c.
)
d.
Bottom cover (see
)
e.
Media card reader board (see
f.
Fan (see
)
NOTE:
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
)
●
Memory module (see
)
●
Heat sink (see
Remove the system board:
1.
Disconnect the monitor connector board cable (1) from the system board.
2.
Disconnect the speaker cable (2) from the system board.
Component replacement procedures
53