Barco R9828832 Manuale Utente

Chapter 4

Control Software/Setup

Daylight Display Systems

28

BARCO DLite Software

A configuration file is the storage of the real configuration. It stores the addressing and the positioning of the

display and the Tile Configuration (i.e. the correction data for the quadrants, the chroma measurements data

and some general info for each tile separately).

Saving of such a configuration file can be interesting when disassembling a configuration; when assembling it

again the system doesn’t have to collect all the information from the tiles again, but can load it from the

configuration file.

In the DLite 

DISPLAY CONFIGURATION FILE

-window one can read the last loaded configuration file.

For loading a previous configuration file act as follows

1.Click 

LOAD FROM DISK

 to enter the following screen

2.Select the configuration file to open or fill in the name in the FILE NAME-screen.
3.Click 

OPEN

For saving the actual configuration file do as follows:

1.Click 

SAVE FROM DISK

 to enter the following screen

2.Select the configuration file to save (then this file will be overwritten) or fill in a new file name in the 

FILE

NAME

 screen.

3.Click 

SAVE

.