Benq MP515 ST Manuale Utente

Operation

23

Operation

Starting up the projector

1.

Plug the power cord into the projector and into a 
power outlet. Turn on the power outlet switch 
(where fitted). Check that the POWER indicator 
light on the projector lights orange after power has 
been applied.

2.

Open the lens cover. If it is closed, it could become 
deformed due to the heat produced by the 
projection lamp.

3.

Press  

Power on the projector or remote control 

to start the projector. As soon as the lamp lights 
up, a "Power On Tone" will be heard. The POWER 
indicator light flashes green and stays green when 
the projector is on.
The start-up procedure takes about 30 seconds. In 
the later stage of start-up, a start-up logo is 
projected.
(If necessary) Rotate the focus ring to adjust the 
image clearness.
To turn off the ring tone, see 

 for details.

4.

If the projector is activated for the first time, select 
your OSD language following the on-screen 
instructions.

5.

If you are prompted for a password, press the 
arrow keys to enter a six-digit password. See 

 for 

details.

6.

Switch all of the connected equipment on.