Benq MP780 ST Manuale Utente

Operation

48

2.

Press  

to 

highlight 

DHCP and press 

/

 to select Off.

3.

Contact your ITS administrator for information on the IP Address, Subnet Mask, 
Default Gateway, and DNS settings.

4.

Press 

 to select the item you want to modify and enter the value.

5.

Press 

 to highlight Apply and press MODE/ENTER.

Configuring the Wireless LAN Settings

1.

Connect the BenQ wireless dongle (optional) to the USB TYPE-A input jack of the 
projector.

2.

Highlight Wireless LAN in SYSTEM SETUP: Advanced > Network Settings

 

menu and 

press MODE/ENTER.

3.

For AP mode connection, you need to note SSID information, then search the 
projector with the same SSID in Q Presenter to start projection. For Infrastructure 
mode connection, you need to select the projector’s SSID which you want to connect. 
See 

 for details.

4.

Use your computer’s wireless connection utility to connect the network.

Controlling the projector remotely through a web browser

Once you have configured the LAN settings, you can find the IP address for the projector in 
the bottom of the network screen. You can use any computer that is on the same local area 
network to control the projector.

1.

Enter the address of the projector in the address bar of your browser and press Enter. 
For example: http://10.60.7.31

2.

The BenQ remote network operation page opens.