Compaq Infortrend Manuale Utente

“Ctlr Unique ID-,” then press ENT.  Enter
any hex number between “0” and “FFFFF”
and press ENT to proceed.

Enter a unique ID for any RAID controller no matter it is configured
in a single or dual-controller configuration.  The unique ID is
recognized by the controller as the following:

1.  A controller-specific identifier that helps controllers to identify

its counterpart in a dual-active configuration.

2.  The unique ID is combined to generate a unique WWN node

name for controllers or RAID systems using Fibre channel host
ports.  The unique node name helps to prevent host computers
from mis-addressing the storage system during the controller
failback/failover processes.

3.  MAC addresses for the controller’s Ethernet port that should be

taken over by a surviving controller in the event of controller
failure.

This submenu is only available for controllers or subsystems that
come with a real-time clock on board.

Choose “View and Edit Configuration
parameters,” “Controller Parameters,"
then press ENT.  Press ▼ or ▲ to scroll
down and select “Set Controller Date
and Time”, then press ENT.

The controller uses GMT (Greenwich Mean Time), a 24-hours clock.
To change the clock to your local time zone, enter the hours later
than the Greenwich mean time following a plus (+) sign.  For
example, enter “+9” for Japanese time zone.

Choose “Time Zone” by pressing ENT.

View and Edit
Config Parms

Controller
Parameters    ..

Set Controller
Date and Time ..

Time Zone
              ..