Compaq Infortrend Manuale Utente

From the “View and Edit SCSI Drives”
menu, select a new or used drive that
the utility is to be performed on; then
press  ENT.  Select “SCSI Drive
Utilities;" then press ENT.  Choose
“Read/Write Test” and press ENT.

Press▼ or ▲ to select and choose to
enable/disable the following options:

1.  "Auto Reassign Bad Block;

2.  Abort When Error Occurs;

3.  Drive Test for - Read Only/Read

and Write.

When finished with configuration,
select "Execute Drive Testing" and
press ENT to proceed.

The Read/Write test progress will be
indicated as a percentage.

You may press ESC and select
"Read/Write Test" later and press ▼ or
▲

 to select to "View Read/Write

Testing Progress" or to "List Current
Bad Block Table."   If you want to stop
testing the drive, select "Abort Drive
Testing" and press ENT to proceed.

Drive Read/Write
 Test         ..

Auto Reassign
Disabled      ..

Abort When Error
Occur-Enabled

Drive Test for
Read and Write..

Execute Drive
   Testing    ..

Drv Testing  23%
  Please Wait !

View Read/Write
Test Progress ..

List Current
Bad Block Table.

Abort Read/Write
   Testing    ..