Compaq Infortrend Manuale Utente
Infortrend
9-13
Maximum Queued I/O Count:
This function allows you to configure the maximum number of I/O
queue the controller can accept from the host computer.
queue the controller can accept from the host computer.
Choose “Host-side SCSI Parameters,” then press [ENTER]. Choose
“Maximum Queued I/O Count,” then press [ENTER]. A list of
available selections will appear. Move cursor bar to an item, then
press [ENTER]. Choose Yes in the dialog box that follows to
confirm the setting.
“Maximum Queued I/O Count,” then press [ENTER]. A list of
available selections will appear. Move cursor bar to an item, then
press [ENTER]. Choose Yes in the dialog box that follows to
confirm the setting.
The controller supports the following Host-side SCSI configurations:
“Maximum Queued I/O Count,” “LUNs per Host SCSI ID,” “Num
of Host-LUN Connect,” “Tag per Host-LUN Connect,” “Peripheral
Dev Type Parameters,” and “Cyl/Head/Sector Mapping Config.”
“Maximum Queued I/O Count,” “LUNs per Host SCSI ID,” “Num
of Host-LUN Connect,” “Tag per Host-LUN Connect,” “Peripheral
Dev Type Parameters,” and “Cyl/Head/Sector Mapping Config.”
LUNs per Host SCSI ID
Choose “LUNs per Host SCSI ID,” then press [ENTER]. A list of
selections will appear. Move cursor bar to an item, then press
[ENTER]. Choose Yes in the dialog box that follows to confirm the
setting.
selections will appear. Move cursor bar to an item, then press
[ENTER]. Choose Yes in the dialog box that follows to confirm the
setting.
LUN Applicability:
If no logical drive has been created and mapped to a host LUN, and
the RAID controller is the only device connecting to the host SCSI
card, usually the operating system will not load the driver for the
the RAID controller is the only device connecting to the host SCSI
card, usually the operating system will not load the driver for the