Compaq Infortrend Manuale Utente

Choose "Logical Drive Assignment..," then press
[ENT].

The message "Redud Ctlr LG Assign Sec Ctlr?"
will appear.  Press [ENT] for two seconds to
confirm. The logical drive has now been assigned
to the Secondary controller.

Map the logical drive (or any logical unit) to a host ID or LUN number under
the designated Secondary controller ID.  The host channel must have a
"Secondary" SCSI ID created. (Create the Secondary controller’s SCSI ID on
host channel and add a SCSI ID to every drive channel in "View and Edit
SCSI Channels").

Choose "View and Edit Host Luns" from main
menu and press [ENT] to proceed.

Use  ▼ or ▲ to navigate through the created IDs
and press [ENT] to select one of them.  Note that
a logical unit previously assigned to a Primary
controller can only be mapped a Primary ID, and
vice versa.

Use  ▼ or ▲ to choose mapping "Logical Drive,"
"Logical Volume," or "Physical Drive" to host
LUN.  If the logical unit has been partitioned,
map each partition to different ID/LUNs.

Use ▼ or ▲ to choose a LUN number and press
[ENT] to confirm.

Press [ENT] again to confirm.

Use  ▼ or ▲ to choose a logical drive/logical
volume if there are many.

Press  [ENT]  and choose a partition if the logical
unit has been partitioned.

Press  [ENT]  again to confirm or scroll down to
"Edit Host Filter Parameter …"  You may refer to
Chapter 8 for more details.

Press [ENT] to confirm the mapping.
Press [ENT] to re-ensure.

This message indicates that the logical unit has
been successfully mapped to the ID/LUN
combination.  Use ▼ or ▲ to continue mapping
other logical units or press [ENT] to delete the
mapped LUN.

Logical Drive
Assignment..

Redud Ctlr LG
Assign Sec Ctlr?

View and Edit
Host Luns     

↕

Map Sec Ctlr
CH=0 ID= 000  ?

Map to
Logical Drive ?

Map Sec. Ctlr
CH=0 ID= 0   ?

Map Host LUN   ?

LG0 RAID5 DRV=3
  9999MB GD SB=0

LG=0 PART=0
     999MB   ?

CH0 ID9 LUN0 Map
to LG0 PRT0?

CH0 ID0 LUN0
No Mapped

Map Host LUN   ?

CH0 ID9 LUN0
Mapto LG0 PRT0