Compaq Infortrend Manuale Utente

 

Completion of the Copy and Replace process will be indicated by a
notification message.  Follow the same method to copy and replace
every member drive.  You may now perform “Expand Logical
Drive” to make use of the added capacity, and then map the
additional capacity to a Host LUN.

In the following example, the logical drive is originally composed of
three member drives and each member drive has the capacity of 1
Gigabyte.  “Copy and Replace” has been performed on the logical
drive and each of its member drives has been replaced by a new
drive with the capacity of 2 Gigabytes.  The next step is to perform
“Expand Logical Drive” to utilize the additional capacity brought by
the new drives.

1.  Select “View and Edit Logical Drives” from the main menu and

select the logical drive with its members copied and replaced.

2.  Select “Expand Logical Drive” in the sub-menu and press

[ENTER] to proceed.  A confirming box will appear.

3.  Proceed by pressing [ENTER] or entering any value no larger

than the "maximum drive expand capacity" and press [ENTER].