Compaq Infortrend Manuale Utente

Press ENT for two seconds to enter the
Main Menu.  Press ▼ or ▲ to select
"View and Edit Logical Drives..," then
press ENT.

Press  ▼ or ▲ to select a logical drive,
then press ENT.

Press  ▼ or ▲ to select “Logical Drive
Name," then press ENT.

Press ▼ or ▲ to change the character of
the flashing cursor.  Press ENT to
move the cursor to the next space. The
maximum number of characters for a
logical drive name is 25.

If you want the controller to auto-detect a replacement drive, make
sure you have the following items set to enabled:

1.  Periodic Drive Check Time
2.  Periodic Auto-Detect Failure Drive Swap Check Time

These two configuration options can be found under “View and Edit
Configuration Parameters” -> “ Drive-Side SCSI Parameters”.

Press ENT for two seconds to enter the
Main Menu.  Press ▼ or ▲ to select
"View and Edit Logical Drives..", then
press ENT.

Press ▼ or ▲ to select the logical drive
that has a failed member, then press
ENT.

Press ▼ or ▲ to select “Rebuild Logical
Drive," then press ENT.

Press  ENT for two seconds to start
rebuilding the logical drive.

The rebuilding progress will be
displayed (as a percentage) on the
LCD.

Enter LD Name:
_

Rebuild Logical
Drive          ?

Rebuilding   25%
Please Wait!

View and Edit
Logical Drives 

↕

View and Edit
Logical Drives 

↕

LG0 RAID5 DRV=3
  2012MB GD SB=1

LG0 RAID5 DRV=3
  2012MB FL SB=0

Logical Drive
Name          ..

Rebuild Logical
Drive         ..